Adimevo

INTERACTIVE AUTOMATION LAB

A little code.
A real reaction.

Connect a trigger to a useful action. Try it with a virtual light and display, then make the routine your own.

Everything here is simulated. No real devices are connected or controlled.

  1. 01
    Build something

    Choose a template, use blocks or write a few lines.

  2. 02
    Arm your routine

    Check the program and get the simulation ready.

  3. 03
    Give it a trigger

    Send motion, a button press or a temperature reading.

START WITH AN IDEA

A few lines can change the whole scene.

01 / THE LOGIC

Your automation.

1 trigger · up to 12 actions
WHEN
THENRun these actions in order.
    See the code behind your blocks 
    
          
    
          
          
    Choose your actions, then arm the automation.
    Editing or loading another example stops the simulation. Reset keeps your program and restores the virtual devices.
    
        
    

        
    
          
    02 / THE REACTION
    Your virtual space.
     SIMULATION
    
          
    
            
    VIRTUAL LIGHTOff
    Green0%
    
            
    VIRTUAL DISPLAY01
    Your space is ready.
    LOCAL SIMULATION
    
          
    
          
    NOT ARMED
    Build a routine and arm it to get started.
    
          
    SEND A VIRTUAL INPUTNo input yet
    22°C
    Set a reading, then send it to the routine.
    
          
    THE STEP LOGVIRTUAL EVENTS ONLY
    1. 01Virtual devices ready. Load or edit an example to begin.
    
        
    
      
    
    
    

    
    A SMALL LANGUAGE. PLENTY TO TRY.
    Make it
    your own.
    These are the only commands the lab runs. They change virtual devices inside this page.
    Have a real-world idea? 
    ON MOTIONStart when you send a motion event.
    ON BUTTONStart when you press the virtual button.
    ON TEMPERATURE >= 24Start when a sent temperature meets the threshold.
    LIGHT ON / LIGHT OFFUse either command to switch the light.
    BRIGHTNESS 60Set brightness from 0 to 100%. Zero turns it off.
    COLOR GREENChoose green, amber, blue, purple, red or white.
    DISPLAY "Welcome home"Show your message, up to 100 characters.
    WAIT 1Wait 0–3 seconds per action, up to 12 seconds total.
    Use one trigger followed by 1–12 actions. Commands are case-insensitive. Temperature thresholds can be −50 to 100°C. This is a learning language for the simulator; it is not Home Assistant YAML or device firmware.
    
    
    A useful automation starts with a clear idea.
    We can help turn yours into a working setup.
    contact@adimevo.com